How to remove paper from printer if jamm in hp laserjet 72525 72535

 Here are some specific steps to resolve paper jam errors in the HP 72525 printer:

*Step 1: Turn off the printer*

Press the Power button to turn off the printer. Unplug the power cord from the back of the printer.

Step 2: Locate the jam

Check the printer's control panel for an error message indicating where the jam is located. Common locations include:

- Input tray

- Output bin

- Automatic document feeder (ADF)

- Internal mechanisms

*Step 3: Remove the jammed paper*

Gently pull out the jammed paper from the printer. Be careful not to tear the paper or damage the printer's internal components.

*Step 4: Check for torn paper*

Ensure there are no torn paper pieces remaining inside the printer.

*Step 5: Open the printer's top cover*

Press the release button and lift the top cover. Check for any jammed paper or debris inside the printer.

*Step 6: Check the paper path*

Look for any blockages or debris in the paper path. Clean out any debris or dust.

*Step 7: Close the top cover*

Close the top cover and ensure it is securely locked.

*Step 8: Plug in the printer*

Plug in the power cord and turn on the printer.

*Step 9: Print a test page*

Print a test page to ensure the printer is working correctly.

If the issue persists, consider:

- Checking the printer's rollers for wear or damage

- Cleaning the printer's internal mechanisms and rollers

- Updating the printer's firmware

- Contacting HP support for further assistance

Remember to always refer to the printer's user manual for specific instructions and guidelines for resolving paper jam errors.

Error Code 13.00 in HP printers

 HP  Printers error code 

Error 13.00 are caused by paper jam. Like wrong paper is placed in the tray. And sometimes wrong paper size is selected. Jams also occur when the grip of the tray's pick up roller is over. If Dust occurs in the sensor then sensor is not able to sense the  paper.

If paper jams repeatedly then

If the paper is not picking up from the tray then you will have to clean or change the pick up first. And if we talk about the sensor then there are about 3 sensors in all trays, one is the paper detection sensor and the second is the paper size detection sensor and the third is the paper path sensor. You will have to clean all these sensors properly. By doing this your paper jam issue will be resolved and your printer will start working.